Index Changes
View Info
This is version 44. It is not the current version, and thus it cannot be edited.
[Back to current version]   [Restore this version]
Message IDSeverityMessage Text - Cause - ActionResource Key
JBIMR0001 SEVERE A fault cannot be set on an exchange already containing a message. Pattern({0}).

Cause: A component attempted to perform an action considered illegal by the JSR208 specification.
Action: Try and determine the component causing the exception and report a problem against that component. 		FAULT_ON_MSG
JBIMR0002 SEVERE Status cannot be set on an exchange already containing a message. Pattern({0}).

Cause: A component attempted to perform an action considered illegal by the JSR208 specification.
Action: Try and determine the component causing the exception and report a problem against that component.		 STATUS_ON_MSG
JBIMR0003 SEVERE Current exchange status is ERROR. Changing status to DONE is not allowed.

Cause: ;A component attempted to perform an action considered illegal by the JSR208 specification.
Action: During component shutdown, this exception is possible while the component is in the processing of cleaning up. Other messages in the log file may give you a clue as to whether this is the situation. If this is not the situation, determine the component causing the exception and report a problem against that component. 		ERROR_STATUS
JBIMR0005 SEVERE Endpoint required to send message exchange.

Cause: Component code didn't specify the required target endpoint for this message exchange.
Action: Try and determine the component causing the exception and report a problem against that component. 		ADDR_NO_ENDPOINT
JBIMR0011 SEVERE Can't find endpoint for service {0}

Cause: The requested service name could not be translated into an known endpoint name.
Action: This is typically one of the following problems:1) A misconfiguration issue with a WSDL service description. Check to see if this service name corresponds to something that is should have been created by some component. 2) The component providing this service has not started. Determine the component that should provide this service and check that it is running and is configured to advertise this service. 3) The component providing the service has been shutdown or the whole JBI installation is shutting down. These types of errors are possible during the shutdown process. 		CANT_FIND_ENDPOINT_FOR_SERVICE
JBIMR0012 SEVERE Endpoint has been deactivated. Service({0}) Endpoint({1})

Cause: The endpoint has been deactivated by the owning component.
Action: This could be the type of error that can happen when a component or the JBI runtime is being shutdown. It can also be a problem in the implementation of a component. If no other shutdown messages occur in the log then file a problem with the component that logged this error. 		INACTIVE_ENDPOINT
JBIMR0014 SEVERE Invalid message exchange pattern URI. Pattern({0})

Cause: Component requested a Message Exchange Pattern not supported by this runtime.
Action: The set of legal Message Exchange Patterns is relatively static. This likely means there is a problem with the component that is getting this error. Report a problem against the component. 		INVALID_MEP_URI
JBIMR0017 SEVERE The destination channel for this exchange is invalid or has been deactivated.

Cause: The endpoint target for this message is a component which is not active.
Action: This is a typical condition that can result when a component is shutdown while other components are using it. If this isn&t the case than report a issue against the JBI NMR runtime. 		INVALID_DESTINATION
JBIMR0018 SEVERE Fault not supported in exchange pattern({0}).

Cause: A component either attempted to create a fault or to set a fault on a Message Exchange and the current state of the Message Exchange doesn't allow this operation.
Action: Report a problem against the component that received this error. 		FAULT_NOT_SUPPORTED
JBIMR0021 SEVERE Attempt to perform operation inconsistent with exchange pattern. Pattern({0}) {1}-State({2}).

Cause: Component attempted to set the status or set a message on a Message Exchange and that action is not allowed by the Message Exchange Pattern.
Action: Report a problem against the component that received this error. 		PATTERN_INCONSISTENT
JBIMR0022 WARNING Operation unavailable - DeliveryChannel has been closed.

Cause: The Delivery Channel is closed. No operations are allowed.
Action: This is a frequent error to see when a component is shutting down. If this error observed and is not related to a shutdown situation, a problem with the JBI runtime and/or the component should be reported. 		CHANNEL_CLOSED
JBIMR0023 SEVERE Send operation not legal in current state. Pattern({0}) State({1})

Cause: A component attempted a SEND operation which isn't allowed in the current state.
Action: Report this as a bug against the component that received the rror. This exception can happen during shutdown of a component, and would be considered normal in that case.		 SEND_NOT_LEGAL
JBIMR0024 SEVERE SendSynch operation not legal in current state. Pattern ({0}) {1}-State({2})

Cause: A component attempted a SEND_SYNCH operation which isn't allowed in the current state.
Action: Report this as a bug against the component that received the rror. This exception can happen during shutdown of a component, and would be considered normal in that case. 		SENDSYNCH_NOT_LEGAL
JBIMR0025 SEVERE Unexpected illegal state change. Pattern ({0}) {1}-State ({2})

Cause: A component attempted an operation that was allowed by the current state of the Message Exchange.
Action: Report this as a problem with the component that received this exception. This exception is possible when a component is shutting down. 		ILLEGAL_STATE_CHANGE
JBIMR0026 SEVERE Error occured getting default transaction from Transaction manager.

Cause:  A component requested that a Message Exchange be associated with a transaction, but the JBI NMR couldn't create a default transaction.
Action: The Glassfish transaction support is either disabled or not functioning correctly. Check your Glassfish configuration before reporting this issue. 		CANT_GET_DEFAULT_TRANSACTION
JBIMR0027 SEVERE Error attempting to suspend transaction.

Cause: Unexpected error from Glassfish transaction manager.
Action:  Report issue with Glassfish transaction manager if nothing can be found that points at the problem. 		CANT_SUSPEND
JBIMR0028 SEVERE Transaction has not been suspended before send().

Cause: A component performed a SEND operation but didn't suspend the transaction associated with the sending thread.
Action:  Report this as a problem against the component getting the exception. 		MUST_SUSPEND
JBIMR0029 SEVERE Error attempting to resume transaction.

Cause:  Unexpected error from Glassfish transaction manager.
Action: Report issue with Glassfish transaction manager if nothing can be found that points at the problem. 		CANT_RESUME
JBIMR0030 SEVERE Error attempting to resume invalid transaction.

Cause: Unexpect error from Glassfish transaction manager.
Action:  Report an issue with the Glassfish transaction manager or against Open-ESB. 		CANT_RESUME_INVALID
JBIMR0032 SEVERE Deactivation failed - endpoint can only be deactived by component which activated it.

Cause: A component attempted to de-activate an endpoint it didn't own.
Action: Report this as a problem against the component getting the exception. 		DEACTIVATE_NOT_OWNER
JBIMR0033 SEVERE Activated service name or endpoint name must not be null or empty.

Cause: A component attempted to active an endpoint with a null value or an empty name.
Action: Report this as a problem against the component receiving the exception. 		ACTIVATE_NOT_NULL
JBIMR0034 SEVERE Endpoint ({0}) has already been activated by component {1}.

Cause: A component attempted to activated an endpoint that was already active by another component.
Action: This is typically a problem with the configuration of a component. If not, report this as a problem with the component getting the exception. 		DUPLICATE_ENDPOINT
JBIMR0035 WARNING Message Exchange timed out.

Cause: A Message Exchange ACCEPT actions timed out instead of completing.
Action: Normal exception when timeouts are used. Report an issue with the component if the error seems to be happening when not expected. 		MESSAGE_TIMEOUT
JBIMR0036 SEVERE Error occured importing WSDL for service {0} : {1}

Cause: A component gave the JBI NMR an incorrectly formatted description of the service.
Action: Report a problem with the component that created the service. It likely isn't the component that receives this exception. 		WSDL_IMPORT_ERROR
JBIMR0038 SEVERE Service connection already exists for interface {0}

Cause: A service assembly was deployed that created an interface connection that already exists.
Action: Determine the conflicting service assemblies and correct the interface names. 		INTERFACE_CONNECTION_EXISTS
JBIMR0039 SEVERE Service connection already exists for endpoint {0} {1} owned by component {2}

Cause: A service assembly was deployed that created an service connection that already exists.
Action: Determine the conflicting service assemblies and correct the service names. 		ENDPOINT_CONNECTION_EXISTS
JBIMR0040 SEVERE Component did not return a descriptor for endpoint {0}

Cause: A component requested an Message Exchange to be created targeting a particular operation for a service. This operation could not be found in the endpoint description returned by the owning component.
Action: This is commonly a configuration issue where the abstract WSDL given to a client doesn' match with the concrete WSDL given to a service. Look at the service description and usages of the service. Can occasionally be a problem with the component that owns the service. In this case report a problem with the owning component. 		ENDPOINT_NO_DESCRIPTOR
JBIMR0041 SEVERE Operation {0} was not found in service {1}

Cause: A component requested a Message Exchange to be created targeting a particular service. No operation information was returned in the service description returned by the owning component.
Action: This is commonly a configuration issue where the abstract WSDL given to a client doesn' match with the concrete WSDL given to a service. Look at the service description and usages of the service. Can occasionally be a problem with the component that owns the service. In this case report a problem with the owning component. 		NONEXISTENT_OPERATION
JBIMR0042 Can't find endpoint for interface {0}

Cause: The requested interface name could not be translated into an known endpoint name.
Action: This is typically one of the following problems:1) A misconfiguration issue with a WSDL service description. Check to see if this interface name corresponds to something that is should have been created by some component. 2) The component providing this interface has not started. Determine the component that should provide this interface and check that it is running and is configured to advertise this interface. 3) The component providing the interface has been shutdown or the whole JBI installation is shutting down. These types of errors are possible during the shutdown process. 		CANT_FIND_ENDPOINT_FOR_INTERFACE
JBIMR0043 SEVERE Unable to match required capabilities to available service endpoint

Cause: A Message Exchange was targeted at any instance of a particular service. No service instance was found that both the consumer and provider could agree on.
Action: Typically this points at a problem with the configuration of a consumer or provider component. This is a rarely used feature, thus it requires detailed investigation of the components involved. It may require reporting a problem against both components. 		CAPABILITY_NO_MATCH
JBIMR0044 Unable to locate activated endpoint for service connection {0} {1}.

Cause: 
Action:  		SERVICE_CONNECTION_NO_ENDPOINT
JBIMR0045 Endpoint addresses cant be an External endpoint: {0} {1}

Cause: 
Action:  		EXTERNAL_ENDPOINT_NOT_VALID
G'day, Anonymous Guest

JSPWiki v2.4.100
[RSS]
« Home Index Changes Prefs
This particular version was published on 02-Sep-09 15:38 PM, -0700 by DerekFrankforth